Questões de Concurso Público INMETRO 2010 para Pesquisador Tecnologista - Acreditação

Foram encontradas 70 questões

Q109401 Português
                                   Imagem 001.jpg

Depreende-se da argumentação do texto que uma “crise de paradigmas” (L.1) é consequência
Alternativas
Q109402 Português
                                   Imagem 001.jpg

Mantêm-se a correção gramatical e a coerência entre argumentos no texto ao se
Alternativas
Q109403 Português
                                     Imagem 002.jpg

Considerando-se as relações de coesão do texto, assinale a opção em que as expressões apresentadas retomam a mesma ideia.
Alternativas
Q109404 Português
                                     Imagem 002.jpg

Assinale a opção correta a respeito do uso dos sinais de pontuação no texto.
Alternativas
Q109405 Português
Considerando que os fragmentos incluídos nas opções abaixo, na ordem em que são apresentados, constituem partes sucessivas de um texto adaptado de Eduardo Manoel Araújo — O equilíbrio entre globalização e localização, 2005. Internet: —, assinale a opção em que o fragmento está gramaticalmente correto.
Alternativas
Q109406 Português
                                          Imagem 003.jpg

No desenvolvimento das ideias no texto, o pronome relativo “que”,
Alternativas
Q109407 Português
                                          Imagem 003.jpg

Assinale a opção correta a respeito das relações de concordância no texto.
Alternativas
Q109408 Português
Imagem associada para resolução da questão
Seriam mantidas a correção gramatical do texto acima e a coerência entre seus argumentos caso se
Alternativas
Q109409 Português
Imagem 005.jpg
Imagem 006.jpg

Nas relações de coesão do texto, a expressão
Alternativas
Q109410 Português
                                       Imagem 007.jpg

Na organização das ideias no texto acima,
Alternativas
Q109411 Português
Preservam-se a correção gramatical e a coerência textual ao se fazer a substituição
Alternativas
Q109412 Português
Assinale a opção que apresenta reescrita textualmente coerente e gramaticalmente correta do trecho “se conseguirmos afinal (...) escrevendo, editando.” (L.21-25).
Alternativas
Q109413 Português
Depreende-se da argumentação do texto que
Alternativas
Q109414 Redação Oficial
Assinale a opção que apresenta associação correta entre o documento indicado e o fechamento apresentado.



Alternativas
Q109415 Redação Oficial
                       Imagem 016.jpg

Para que o exemplo fictício de documento apresentado acima respeite as normas de elaboração de documentos oficiais, é necessário
Alternativas
Q109416 Inglês
This text refers to questions from 16 through 19.

       In today’s society, measurements are used for many applications not only in industry and science but also in our daily life. There are measurements involved such as when buying petrol or foodstuff from the shop or energy from utilities; when trying to keep within the speed limits when driving your car; in health  analyses when doctors diagnose and treat on the basis of blood pressure measurements; or when authorities make measurements  to control the pollution in the air that we all breathe. Common to all these situations is that the measurement results need to be accepted (with confidence) by society. If not, the result is repeated  measurements, disputes and legal actions. In most cases, the consumer or even the user of the measuring instrument does not personally have either the knowledge, the opportunity or the equipment to check whether the measurement that is so important for us is correct or not. In most countries, the legislature therefore has decided to set accuracy requirements for these types of measurements; most commonly, measurements in trade are regulated, but increasingly, also those within the health and environmental sectors.
       Ongoing harmonization in Europe has become more and more the first reference point for authorities in the establishment of requirements for measurements, as requirements for new
measuring instruments are stated in directives; the most important of these directives being the Measuring Instrument Directive (MID) and the directive on Non-Automatic Weighing Instruments
(NAWI). For many of the instrument categories covered by the directives, there is a national possibility to select the prescription of different accuracy classes for different applications, and furthermore, to decide on what maximum permissible errors (MPEs) to apply in-service.

Imagem 017.jpg

Based on the text, choose de correct option.
Alternativas
Q109417 Inglês
This text refers to questions from 16 through 19.

       In today’s society, measurements are used for many applications not only in industry and science but also in our daily life. There are measurements involved such as when buying petrol or foodstuff from the shop or energy from utilities; when trying to keep within the speed limits when driving your car; in health  analyses when doctors diagnose and treat on the basis of blood pressure measurements; or when authorities make measurements  to control the pollution in the air that we all breathe. Common to all these situations is that the measurement results need to be accepted (with confidence) by society. If not, the result is repeated  measurements, disputes and legal actions. In most cases, the consumer or even the user of the measuring instrument does not personally have either the knowledge, the opportunity or the equipment to check whether the measurement that is so important for us is correct or not. In most countries, the legislature therefore has decided to set accuracy requirements for these types of measurements; most commonly, measurements in trade are regulated, but increasingly, also those within the health and environmental sectors.
       Ongoing harmonization in Europe has become more and more the first reference point for authorities in the establishment of requirements for measurements, as requirements for new
measuring instruments are stated in directives; the most important of these directives being the Measuring Instrument Directive (MID) and the directive on Non-Automatic Weighing Instruments
(NAWI). For many of the instrument categories covered by the directives, there is a national possibility to select the prescription of different accuracy classes for different applications, and furthermore, to decide on what maximum permissible errors (MPEs) to apply in-service.

Imagem 017.jpg

It can be concluded from the text that
Alternativas
Q109418 Inglês
This text refers to questions from 16 through 19.

       In today’s society, measurements are used for many applications not only in industry and science but also in our daily life. There are measurements involved such as when buying petrol or foodstuff from the shop or energy from utilities; when trying to keep within the speed limits when driving your car; in health  analyses when doctors diagnose and treat on the basis of blood pressure measurements; or when authorities make measurements  to control the pollution in the air that we all breathe. Common to all these situations is that the measurement results need to be accepted (with confidence) by society. If not, the result is repeated  measurements, disputes and legal actions. In most cases, the consumer or even the user of the measuring instrument does not personally have either the knowledge, the opportunity or the equipment to check whether the measurement that is so important for us is correct or not. In most countries, the legislature therefore has decided to set accuracy requirements for these types of measurements; most commonly, measurements in trade are regulated, but increasingly, also those within the health and environmental sectors.
       Ongoing harmonization in Europe has become more and more the first reference point for authorities in the establishment of requirements for measurements, as requirements for new
measuring instruments are stated in directives; the most important of these directives being the Measuring Instrument Directive (MID) and the directive on Non-Automatic Weighing Instruments
(NAWI). For many of the instrument categories covered by the directives, there is a national possibility to select the prescription of different accuracy classes for different applications, and furthermore, to decide on what maximum permissible errors (MPEs) to apply in-service.

Imagem 017.jpg

According to the text, it can be deduced that
Alternativas
Q109419 Inglês
This text refers to questions from 16 through 19.

       In today’s society, measurements are used for many applications not only in industry and science but also in our daily life. There are measurements involved such as when buying petrol or foodstuff from the shop or energy from utilities; when trying to keep within the speed limits when driving your car; in health  analyses when doctors diagnose and treat on the basis of blood pressure measurements; or when authorities make measurements  to control the pollution in the air that we all breathe. Common to all these situations is that the measurement results need to be accepted (with confidence) by society. If not, the result is repeated  measurements, disputes and legal actions. In most cases, the consumer or even the user of the measuring instrument does not personally have either the knowledge, the opportunity or the equipment to check whether the measurement that is so important for us is correct or not. In most countries, the legislature therefore has decided to set accuracy requirements for these types of measurements; most commonly, measurements in trade are regulated, but increasingly, also those within the health and environmental sectors.
       Ongoing harmonization in Europe has become more and more the first reference point for authorities in the establishment of requirements for measurements, as requirements for new
measuring instruments are stated in directives; the most important of these directives being the Measuring Instrument Directive (MID) and the directive on Non-Automatic Weighing Instruments
(NAWI). For many of the instrument categories covered by the directives, there is a national possibility to select the prescription of different accuracy classes for different applications, and furthermore, to decide on what maximum permissible errors (MPEs) to apply in-service.

Imagem 017.jpg

Based on the text, one can infer that
Alternativas
Q109420 Inglês
                                      Imagem 018.jpg
Imagem 019.jpg

According to what is stated in the text, choose the correct option.
Alternativas
Respostas
1: E
2: B
3: C
4: D
5: A
6: E
7: D
8: C
9: A
10: C
11: B
12: A
13: C
14: C
15: D
16: B
17: B
18: C
19: D
20: A