Questões de Concurso Comentadas para analista de redes e comunicação de dados

Foram encontradas 1.363 questões

Resolva questões gratuitamente!

Junte-se a mais de 4 milhões de concurseiros!

Q76682 Banco de Dados
No tocante aos datawarehouses, a característica desses armazéns de dados que está relacionada ao fato de que "uma vez inseridos, os dados não podem ser alterados, embora possam ser eliminados", é:
Alternativas
Q76681 Redes de Computadores
Na rede token-ring, sua arquitetura encontra-se suportada por uma topologia lógica e uma topologia física, sendo esta última (física) do tipo:
Alternativas
Q76680 Banco de Dados
O MS-SQL Server apresenta uma ferramenta que exibe um histórico das ações efetuadas no banco de dados, inclusive as que estão sendo executadas no momento. Esta ferramenta é conhecida como:
Alternativas
Q76679 Segurança da Informação
Na vulnerabilidade dos sistemas, o cavalo de troia, os applets mal intencionados e o spoofing, são exemplos de métodos de ataque do tipo:
Alternativas
Q76678 Redes de Computadores
A rede delimitadora que tem como objetivo principal segregar o ambiente interno (seguro) do ambiente externo (inseguro), é conhecida como:
Alternativas
Q76677 Segurança da Informação
Na gestão de risco, o registro da debilidade no sistema atual de proteção em relação a todas as ameaças em potencial, é realizado durante a atividade:
Alternativas
Q76675 Algoritmos e Estrutura de Dados
A técnica que é utilizada para obtenção de um novo arquivo único, a partir de dois ou mais arquivos que contenham registros de mesmo tipo, estando esses arquivos classificados segundo um mesmo critério pela mesma chave, é conhecida como:
Alternativas
Q76674 Engenharia de Software
Emrelação a O.O., são tipos reconhecidos de herança:
Alternativas
Q76673 Engenharia de Software
Na Orientação a Objetos (O.O.), os módulos são divididos em duas partes visando ao atendimento do princípio da ocultação de informação. São elas:
Alternativas
Q76671 Algoritmos e Estrutura de Dados
Em relação aos procedimentos e funções, pode-se afirmar que:
Alternativas
Q76670 Arquitetura de Computadores
Considere A=1010 e B=1100, sendo esses valores representados em binário. O valor de y para = A.B, ou seja, y =Aand B, é:
Alternativas
Q76669 Programação
No tocante aos tipos de dados das variáveis, aquele que NÃO é um tipo estruturado:
Alternativas
Q76668 Sistemas Operacionais
A técnica de gerência de memória cujas memórias principal e secundária são combinadas, dando ao usuário a ilusão de existir uma memória muito maior que a memória principal, é conhecida como:
Alternativas
Q76667 Inglês
IMPORTANT NOTICE

CAUTION
PROPERHANDLINGOFTHE FINECARTRIDGES
Handle the FINE Cartridges of this product properly, observing
the cautions noted below. Improper handling causes
malfunction or other problems in the product, as well as
damage to the FINE Cartridges.
Note:

1) When you install the FINE cartridges in the product, insert
the FINE Cartridges into the FINE Cartridge Holder
carefully not to knock them against the sides of the holder.
Also be sure to install them in a well-lit environment.
For details, refer to your setup sheet.

2) Do not attempt to disassemble or modify the FINE
cartridges.

3) Do not handle the FINE Cartridges roughly such as
applying them excessive pressure or dropping them.

4) Do not rinse or wipe the FINE Cartridges.

5) Once you have installed the FINE Cartridges, do not
remove them unnecessarily.

(Taken from Canon Inc. 2008 - Printed in Vietnam)

Choose the only correct statement, according to the text.
Alternativas
Q76666 Inglês
IMPORTANT NOTICE

CAUTION
PROPERHANDLINGOFTHE FINECARTRIDGES
Handle the FINE Cartridges of this product properly, observing
the cautions noted below. Improper handling causes
malfunction or other problems in the product, as well as
damage to the FINE Cartridges.
Note:

1) When you install the FINE cartridges in the product, insert
the FINE Cartridges into the FINE Cartridge Holder
carefully not to knock them against the sides of the holder.
Also be sure to install them in a well-lit environment.
For details, refer to your setup sheet.

2) Do not attempt to disassemble or modify the FINE
cartridges.

3) Do not handle the FINE Cartridges roughly such as
applying them excessive pressure or dropping them.

4) Do not rinse or wipe the FINE Cartridges.

5) Once you have installed the FINE Cartridges, do not
remove them unnecessarily.

(Taken from Canon Inc. 2008 - Printed in Vietnam)

The discourse marker such as in the sentence "Do not handle the FINE Cartridges roughly such as applying them excessive pressure or dropping them" (lines 15-16) expresses the idea of:
Alternativas
Q76665 Inglês
IMPORTANT NOTICE

CAUTION
PROPERHANDLINGOFTHE FINECARTRIDGES
Handle the FINE Cartridges of this product properly, observing
the cautions noted below. Improper handling causes
malfunction or other problems in the product, as well as
damage to the FINE Cartridges.
Note:

1) When you install the FINE cartridges in the product, insert
the FINE Cartridges into the FINE Cartridge Holder
carefully not to knock them against the sides of the holder.
Also be sure to install them in a well-lit environment.
For details, refer to your setup sheet.

2) Do not attempt to disassemble or modify the FINE
cartridges.

3) Do not handle the FINE Cartridges roughly such as
applying them excessive pressure or dropping them.

4) Do not rinse or wipe the FINE Cartridges.

5) Once you have installed the FINE Cartridges, do not
remove them unnecessarily.

(Taken from Canon Inc. 2008 - Printed in Vietnam)

According to the notice, the user should install the FINE cartridges in a well-lit environment. This means that the environment should be:
Alternativas
Q76664 Inglês
IMPORTANT NOTICE

CAUTION
PROPERHANDLINGOFTHE FINECARTRIDGES
Handle the FINE Cartridges of this product properly, observing
the cautions noted below. Improper handling causes
malfunction or other problems in the product, as well as
damage to the FINE Cartridges.
Note:

1) When you install the FINE cartridges in the product, insert
the FINE Cartridges into the FINE Cartridge Holder
carefully not to knock them against the sides of the holder.
Also be sure to install them in a well-lit environment.
For details, refer to your setup sheet.

2) Do not attempt to disassemble or modify the FINE
cartridges.

3) Do not handle the FINE Cartridges roughly such as
applying them excessive pressure or dropping them.

4) Do not rinse or wipe the FINE Cartridges.

5) Once you have installed the FINE Cartridges, do not
remove them unnecessarily.

(Taken from Canon Inc. 2008 - Printed in Vietnam)

The pronoun them in the sentence ".insert the FINE Cartridges into the FINE Cartridge Holder carefully not to knock them against the sides of the holder" (lines 8-10) refers to:
Alternativas
Q76662 Inglês
IMPORTANT SAFEGUARDS

For your protection, please read these safety
instructions completely before operating the appliance, and
keep this manual for future reference.

Carefully observe all warnings, precautions and
instructions on the appliance, or the one described in the
operating instructions and adhere to them.

POWER SOURCES - This set should be operated
only from the type of power source indicated on the marking
label. If you are not sure of the type of electrical power supplied
to your home, consult your dealer or local power company. For
those sets designed to operate from battery power, or other
sources, refer to the operating instructions.

OBJECTAND LIQUID ENTRY - Never push objects
of any kind into the set through openings as they may touch
dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the set.

ATTACHMENTS - Do not use attachments not
recommended by the manufacturer, as they may cause
hazards.

CLEANING - Unplug the set from the wall outlet
before cleaning or polishing it. Do not use liquid cleaners or
aerosol cleaners. Use a cloth lightly dampened with water for
cleaning the exterior of the set.

OVERLOADING - Do not overload wall outlets,
extension cords or convenience receptacles beyond their
capacity, since this can result in fire or electric shock.

ACCESSORIES - Do not place the set on an
unstable cart, stand, tripod, bracket, or table. The set may
fall, causing serious injury to a child or an adult, and serious
damage to the set. Use only a cart stand tripod, bracket, or
table recommended by the manufacturer.

WATER AND MOISTURE - Do not use power-line
operated sets near water - for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, etc.

SERVICING - Do not attempt to service the set
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.

SAFETY CHECK - Upon completion of any service
or repairs to the set, as the service technician to perform
routine safety checks (as specified by the manufacturer) to
determine that the set is in safe operating condition.

(Adapted from SONY manual - Sony Corporation - 2000 - Printed in Japan).

According to the instructions in the manual, the user should not attempt to service the set himself/herself as opening or removing covers may expose him/her to dangerous voltage or other hazards. (paragraph 10 ) According to this guideline, the user:
Alternativas
Q76661 Inglês
IMPORTANT SAFEGUARDS

For your protection, please read these safety
instructions completely before operating the appliance, and
keep this manual for future reference.

Carefully observe all warnings, precautions and
instructions on the appliance, or the one described in the
operating instructions and adhere to them.

POWER SOURCES - This set should be operated
only from the type of power source indicated on the marking
label. If you are not sure of the type of electrical power supplied
to your home, consult your dealer or local power company. For
those sets designed to operate from battery power, or other
sources, refer to the operating instructions.

OBJECTAND LIQUID ENTRY - Never push objects
of any kind into the set through openings as they may touch
dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the set.

ATTACHMENTS - Do not use attachments not
recommended by the manufacturer, as they may cause
hazards.

CLEANING - Unplug the set from the wall outlet
before cleaning or polishing it. Do not use liquid cleaners or
aerosol cleaners. Use a cloth lightly dampened with water for
cleaning the exterior of the set.

OVERLOADING - Do not overload wall outlets,
extension cords or convenience receptacles beyond their
capacity, since this can result in fire or electric shock.

ACCESSORIES - Do not place the set on an
unstable cart, stand, tripod, bracket, or table. The set may
fall, causing serious injury to a child or an adult, and serious
damage to the set. Use only a cart stand tripod, bracket, or
table recommended by the manufacturer.

WATER AND MOISTURE - Do not use power-line
operated sets near water - for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, etc.

SERVICING - Do not attempt to service the set
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.

SAFETY CHECK - Upon completion of any service
or repairs to the set, as the service technician to perform
routine safety checks (as specified by the manufacturer) to
determine that the set is in safe operating condition.

(Adapted from SONY manual - Sony Corporation - 2000 - Printed in Japan).

The verb push in the sentence "Never push objects of any kind into the set through openings." (paragraph 4 ) and the noun hazards in the sentence ".as they may cause hazards." (paragraph 5 ) should be correctly translated into Portuguese, respectively, as:
Alternativas
Respostas
1181: C
1182: D
1183: B
1184: B
1185: C
1186: B
1187: C
1188: E
1189: A
1190: C
1191: E
1192: C
1193: E
1194: C
1195: D
1196: E
1197: B
1198: D
1199: B
1200: E